[5 Ways] How to Fix Green Lines on iPhone Screen After Drop

If you accidentally drop your iPhone, it may malfunction or stop working properly when you least expect it, and you may see green lines on your iPhone screen. So can green lines on the iPhone screen be fixed?

While there is no exact answer, there are some simple ways you can try to minimize the damage and temporarily eliminate the green lines. Take a look at some of the suggestions below!

How to Fix Green Lines on iPhone Screen After Drop - 5 Ways

Generally, iPhone x green line after drop are not caused by software issues. Drop damage can cause display connectors, etc. To fix the green lines on your phone screen, you can first try the troubleshooting methods listed below. Worst case scenarios may require contacting the manufacturer or a professional repair technician.

Way 1. Force Restart Your iPhone

This basic fix can solve a lot of problems. Because it forces the phone to shut down everything and restart. If the green line is caused by some temporary glitch in the phone, just try force restarting the iPhone to fix the problem of “iPhone screen green lines after drop”.

>> For iPhone 8 and later with Face ID: Quickly press and release the Volume Up button > Quickly press and release the Volume Down button > Press and hold the Side/Power button when the Apple logo appears.

>> For iPhone 7/7 Plus: Press and hold the both Top button and Volume Down button > Release both buttons until the Apple logo appears.

>> For iPhone 6s, SE and earlier with Home button: Hold down the Home button and the Top (or Side) button together > Release them at same time when the Apple logo appears.

Way 2. Check for Physical Damage

If you see a green line on your iPhone screen after dropping it, remember to check if your iPhone has sustained any serious physical damage. This is a really frustrating situation and you can only take it to an Apple Store or go to a local repair shop.

If the problem cannot be fixed, you can choose to get a new phone. The next section will tell you how to transfer old iPhone to new iPhone.

Way 3. One-click Fix iPhone Green Lineswith with FoneTool Repair

Before attempting more drastic measures like DFU mode or factory reset, try using FoneTool Repair to fix any underlying software issues that might be causing display problems. This professional tool can resolve various iOS system glitches without data loss.

Step 1. Download and install FoneTool Repair on your PC. And launch the tool, connect your iPhone to PC via USB.

Step 2. Select "iOS System Repair", and tap "Start Repair" to continue.

Step 3. Choose "Standard Repair" mode (recommended first).

Step 4. Download the firmware and click "Start Repair" to fix the iPhone issue.

This can solve software-related display problems without the risk of data loss.

Way 4. Put iPhone in DFU Mode

If your iPhone screen has the frustrating blue screen issue, DFU mode can be a troubleshooting tool for your iPhone. Please note that this method will erase all data on your device, so make sure you have backup iPhone before proceeding.

Here’s how to fix green lines on iPhone screen after drop:

Step 1. Initiate the process by establishing a connection between thee iPhone and iTunes on the computer.

For iPhone 8 and later:

• Tap the Volume Up button > Followed by the Volume Down button.
• Press and sustain the Power button until the iPhone screen darkens > Clutch both the Power and Volume Down buttons.
• After a few moments, release the Power button > Continue to clasp the Volume Down button.

For iPhone 7 and iPhone 7 Plus:

• Press on both the Power button and the Volume Down button.
• After a few seconds, release the Power button but still holding down the Volume Down button.

For iPhone 6s and earlier:

• Press and hold the Power button and the Home button.
• After a few seconds, release the Power button while continuing to hold the Home button.

Step 2. While in DFU mode, the iPhone’s screen will turn black > When iTunes notifies your device is detected in Recovery Mode, restart iPhone through computer.

Step 3. Then, iTunes will recognize your iPhone > Clicking OK to facilitate the recovery process.

Way 4. Reset iPhone to Factory Settings

Restoring the iPhone to factory settings is also one of the ways to solve green line on iPhone screen after drop. But before that, you'd better back up your iPhones in advance to protect important data, because restoring the iPhone to factory settings will erase iPhone data.

Follow the steps below to perform a factory reset:

Step 1. Open iPhone Settings app > General > Choose Transfer or Reset iPhone option.

Step 2. Tap Erase All Content and Settings > Enter your passcode to confirm the operation.

Way 5. Contact Apple Support

If none of the above tips work, there may be a hardware issue causing the green lines on the screen. In this case, it may also be helpful to contact Apple Support for further assistance. Apple Support can help diagnose the specific issue you're experiencing and provide professional guidance to fix any hardware issues that may be affecting your iPhone's display.

Bonus Tip: Backup iPhone Data to Avoid Data Loss

Before trying to deal with the green line on the iPhone screen after a drop, backing up your data is a safe option. Doing so ensures that you don't lose important files, media, and documents in the event of any further problems. FoneTool is a professional iOS data management tool that provides powerful backup and transfer features.

Simple Steps to Back iPhone to PC

FoneTool this iPhone backup software allow you to back up all iPhone data to a computer/other hard drives in one click, or you can selectively back up the files you need.

Step 1. Download and open FoneTool > Connect the iPhone to the computer with a USB cable.

Step 2. Click Phone Backup on the left pane > Choose Full Backup (If you wish to partly backup photos, videos, music, contacts, messages, choose Selective Backup) > Tap Get Started.

Step 3. You can enable backup encryption to protect private data if needed > Tap Backup Storage Path to decide a location > Click Start Backup to start the backup.

Click to Transfer Data from Old iPhone to New iPhone

At the same time, when you change to a new iPhone, it can provide iPhone to iPhone transfer features to help you quickly complete the data conversion. It supports all models from iPhone 4 to the latest iPhone with all iOS versions.

Step 1. Launch FoneTool > Connect your iPhones to a computer.

Step 2. Click Phone Transfer > Go to iPhone to iPhone > Click Start Transfer.

Step 3. Click Enable backup encryption to keep your private data safer > Click Start Transfer to start the transfer.

Simple Guide to Enter/Exit Recovery or DFU Mode

In addition to helping you back up and transfer data, FoneTool Repair also provides professional iOS system repair services. If you don't know how to enter or exit Recovery/DFU Mode, you can check the tips given by FoneTool Repair.

Step 1. Select Recovery Mode in the Windows.

Step 3. Then you can choose the section that you need.

Conclusion

That's all about how to fix green lines on iPhone screen after drop. You can follow the above troubleshooting methods to solve the problem first. For software-related issues, FoneTool Repair provides a professional solution to fix system glitches that might be causing display problems. If the situation is worse, you may need to seek help from a professional repairman.

To ensure that you do not accidentally lose any iPhone data, backing up your phone will be a good choice. FoneTool supports you to back up and transfer data to a new phone for free, while FoneTool Repair handles system-level issues for a complete solution.